![](http://pdfasset.owneriq.net/3/74/3745b6c4-2bd5-48b0-b21c-0826ad649160/3745b6c4-2bd5-48b0-b21c-0826ad649160-bg85.png)
WAP3205 User’s Guide
133
CHAPTER 13
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• WAP3205 Access and Login
• Internet Access
• Resetting the WAP3205 to Its Factory Defaults
• Wireless Router/AP Troubleshooting
13.1 Power, Hardware Connections, and LEDs
The WAP3205 does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the WAP3205.
2 Make sure the power adaptor or cord is connected to the WAP3205 and plugged in
to an appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the WAP3205.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.5 on
page 20.
2 Check the hardware connections. See the Quick Start Guide.