Filter
Top Products
Chapter 12 Maintenance
WAP3205 User’s Guide
128
Click Maintenance > Backup/Restore. Information related to factory defaults,
backup configuration, and restoring configuration appears as shown next.
Figure 79 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 46 Maintenance > Backup/Restore
LABEL DESCRIPTION
Backup Click Backup to save the WAP3205’s current configuration to your
computer.
File Path Type in the location of the file you want to upload in this field or click
Browse... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you
must decompress compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Note: Do not turn off the WAP3205 while configuration file upload is in
progress.
After you see a “configuration upload successful” screen, you must then
wait one minute before logging into the WAP3205 again. The WAP3205
automatically restarts in this time causing a temporary network
disconnect.
If you see an error screen, click Back to return to the Backup/Restore
screen.
Reset Pressing the Reset button in this section clears all user-entered
configuration information and returns the WAP3205 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your WAP3205. Refer to the chapter about introducing the Web
Configurator for more information on the RESET button.