Filter
Top Products
WAP3205 User’s Guide
139
CHAPTER 14
Product Specifications
The following tables summarize the WAP3205’s hardware and firmware features.
Table 48 Hardware Features
Dimensions (W x D x
H)
162 mm x 115 mm x 33 mm
Weight 245 g
Power Specification Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC 1A
Two Ethernet ports Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
LEDs PWR, LAN1-2 WLAN, WPS
Reset Button The reset button is built into the rear panel. Use this button to
restore the WAP3205 to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
WPS button Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
Antenna The WAP3205 is equipped with two 2dBi (2.4GHz) detachable
antennas to provide clear radio transmission and reception on the
wireless network.
Operation
Environment
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Storage Environment Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
Table 49 Firmware Features
FEATURE DESCRIPTION
Default IP Address 192.168.1.2
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
Wireless Interface Wireless LAN
Default Wireless SSID ZyXEL