Filter
Top Products
Chapter 6 Introducing the Web Configurator
WAP3205 User’s Guide
59
The following table describes the labels in this screen.
6.2.3.2 Time/Date Edit
One timezone can cover more than one country. You can choose a particular
country in which the WAP3205 is located and have the WAP3205 display and use
the current time and date for its logs.
Click the
icon to change the time and date display.
Figure 28 Change Time Zone
The following table describes the labels in this screen.
Note: You can also edit the timezone in Section 12.5 on page 123.
6.3 Resetting the WAP3205
If you forget your password or IP address, or you cannot access the Web
Configurator, you will need to use the RESET button at the back of the WAP3205
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the password will be reset to “1234”
and the IP address will be reset to “192.168.1.2”.
Table 20 Change Weather
LABEL DESCRIPTION
o
C or
o
F Choose which temperature unit you want the WAP3205 to display.
Change
Location
Select the location for which you want to know the weather. If the city
you want is not listed, choose one that is closest to it.
Finish Click this to apply the settings and refresh the date and time display.
Table 21 Change Time Zone
LABEL DESCRIPTION
Change time
zone
Select the specific country whose current time and date you want the
WAP3205 to display.
Finish Click this to apply the settings and refresh the weather display.