Filter
Top Products
Chapter 8 Tutorials
WAP3205 User’s Guide
82
2 The default IP address of the WAP3205 is “192.168.1.2”. In this case, your
computer must have an IP address in the range between “192.168.1.3” and
“192.168.1.254”.
3 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box.
Enter “ipconfig” to show your computer’s IP address. If your computer’s IP
address is not in the correct range then see Appendix C on page 167 for
information on changing your computer’s IP address.
4 After you’ve set your computer’s IP address, open a web browser such as Internet
Explorer and type “http://192.168.1.2” as the web address in your web browser.
5 Enter “1234” (default) as the password and click Login.
6 Type a new password and retype it to confirm, then click Apply. Otherwise, click
Ignore.
7 The Easy mode appears. Click Expert Mode in the navigation panel.
8 Go to Configuration > Network > Wireless LAN > General. Configure the
screen as follows. In this example, you select Enable Intra-BSS Traffic for
SSID_Worker and SSID_Guest to allow wireless clients in the same wireless
network to communicate with each other. Click Apply.