Filter
Top Products
Chapter 10 Wireless LAN
WAP3205 User’s Guide
112
Note: With WPS, wireless clients can only connect to the wireless network using the
first SSID on the WAP3205.
Figure 66 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS Select this to enable the WPS feature.
PIN Number This displays a PIN number last time system generated. Click Generate
to generate a new PIN number.
Status
Status This displays Configured when the WAP3205 has connected to a
wireless network using WPS or when Enable WPS is selected and
wireless or wireless security settings have been changed. The current
wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no
wireless or wireless security changes on the WAP3205 or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
Release
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the WAP3205.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can
associate with the WAP3205.
SSID This is the name of the wireless network (the WAP3205’s first SSID).
Security This is the type of wireless security employed by the network.
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to reload the previous configuration for this screen.