Filter
Top Products
Chapter 8 Tutorials
WAP3205 User’s Guide
81
Clients can associate only with the SSIDs for which they have the correct security
settings. Clients using different SSIDs can access the Internet and the wired
network behind the WAP3205 (such as a printer), but they cannot listen to each
other’s traffic.
For example, you may set up three wireless networks (A, B and C) in your office.
A is for workers, B is for guests and C is specific to a VoIP device in the meeting
room.
8.5.1 Configuring Security Settings of Multiple SSIDs
The WAP3205 is in access point mode by default. If you want to use multiple
SSIDs when the WAP3205 is in universal repeater mode, see Chapter 5 on page
45 for how to set the WAP3205 to universal repeater mode.
This example shows you how to configure the SSIDs with the following parameters
on your WAP3205 (in access point mode).
1 Connect your computer to the LAN port of the WAP3205 using an Ethernet cable.
A
B
C
SSID_Guest
SSID_Worker
SSID_VoIP
SSID SECURITY TYPE KEY MAC FILTERING
SSID_Worker WPA2-PSK
WPA Compatible
DoNotStealMyWireless
Network
Disable
SSID_Guest Static WEP 128bit keyexample123 Disable
SSID_VoIP WPA-PSK VoIPOnly12345678 Allow
00:A0:C5:01:23:45