Filter
Top Products
WAP3205 User’s Guide
55
CHAPTER 6
Introducing the Web
Configurator
6.1 Overview
This chapter describes how to access the WAP3205 Web Configurator and provides
an overview of its screens.
The Web Configurator is an HTML-based management interface that allows easy
setup and management of the WAP3205 via Internet browser. Use Internet
Explorer 6.0 and later or Safari 2.0 or later versions. The recommended screen
resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter (Chapter 13 on page 133) to see how to
make sure these functions are allowed in Internet Explorer.
6.2 Accessing the Web Configurator
1 Connect your computer to the LAN port of the WAP3205.
2 The default IP address of the WAP3205 is “192.168.1.2”. In this case, your
computer must have an IP address in the range between “192.168.1.3” and
“192.168.1.254”.
3 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box.
Enter “ipconfig” to show your computer’s IP address. If your computer’s IP
address is not in the correct range then see Appendix C on page 167 for
information on changing your computer’s IP address.