Filter
Top Products
WAP3205 User’s Guide
25
CHAPTER 3
Access Point Mode
3.1 Overview
The WAP3205 is set to access point mode by default. In this mode your WAP3205
bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See
the figure below for an example.
Figure 4 Wireless Internet Access in Access Point Mode
Note: See Chapter 8 on page 73 for an example of setting up a wireless network in
Access Point mode.
3.2 What You Can Do
•Use the Status screen (Section 3.4 on page 27) to view read-only information
about your WAP3205.
•Use the LAN screen (Chapter 11 on page 117) to set the IP address for your
WAP3205 acting as an access point.
•Use the Wireless LAN screens (Chapter 10 on page 99) to configure the
wireless settings and wireless security between the wireless clients and the
WAP3205.
3.3 What You Need to Know
See Chapter 8 on page 73 for a tutorial on setting up a network with the
WAP3205 as an access point.