154 Chapter 3
File Tree Layouts on the Managed-Node Platforms
File Tree Layout on SINIX Managed Nodes
File Tree Layout on SINIX Managed
Nodes
The ITO software on SINIX managed nodes is based on the typical SVR4
platforms as follows:
Figure 3-17 ITO Software on SINIX Managed Nodes
Standalone Systems or NFS Cluster Servers
on SINIX
In general, standalone systems are treated as cluster servers.
The cluster server exports the /opt file system with read-only
permissions. ITO software is located on the /opt/OV path, with the
logical path name the same as the physical path name.
NOTE By default, SINIX does not export the /opt file system. You can enable
ITO cluster operations manually by exporting the /opt file system to one
SINIX system, and then mount it from other SINIX systems. You must
set up the cluster manually before the ITO installation process, so that it
is available for the ITO installation.
bin
conf tmp
log
/opt/OV
OpC
OpC
OpC
OpC
install
lib
locale
<lang>
bin
conf
/var/opt/OV
include
LC_MESSAGES
B
B
bin
OpC
utils
