Polycom RealPresence Resource Manager System Operations Guide Endpoint Fields for Scheduled Provisioning
176 Polycom, Inc.
Monitor 3 Options
Monitor 3 Specifies the aspect ratio for recording.
• Off — Select if you do not have a VCR or DVD player
connected to record video conferences.
• 4:3 — Select to record for playback on a standard
monitor.
• 16:9—Select to record for playback on a wide-screen
monitor, if your recording device has this capability.
See the endpoint product documentation for more
information about these selections.
Y—
Video Format Specifies the VCR or DVD player’s format:
• S-Video — Select if the VCR or DVD player is
connected to a Polycom HDX system using an
S-Video cable.
• Composite — Select if the VCR or DVD player is
connected to a Polycom HDX system using a
composite video cable and S-Video to RCA adapter.
Y—
Output Upon Screen
Saver Activation
Specifies whether black video or no signal is sent to the
VCR or DVD player when the system goes to sleep and
the screen saver activates.
• Select Black to send black video.
• Select No Signal to have the VCR or DVD player
react as if it is not connected when the system goes
to sleep.
Y—
VCR/DVD Record
Source
Specifies the video source to be recorded to videotape
or DVD.
• If Far is enabled, the recorded video will switch to
the current far site speaker.
• If both Near and Far are enabled, the recorded
video will switch between near and far sites
depending on the current speaker.
• If Content is enabled, any content sent during the
call is recorded.
Y—
Near Y—
Far Y—
Content Y—
Screen Saver Wait
Time
The time the system will delay before going into
standby mode after nonuse
Y
Cameras > Cameras 1
Field For the endpoint systems being provisioned...
HDX Series
VSX Series
QDX Series
