Polycom RealPresence Resource Manager System Operations Guide Manage Polycom VBP Devices
320 Polycom, Inc.
Delete a Polycom VBP Device
To delete a Polycom VBP device from a RealPresence Resource Manager
system
1 Go to Network Device > VBPs.
2 Select the Polycom VBP device of interest and click Delete.
3 Click Yes to confirm the deletion.
Identify Endpoints Using the Polycom VBP Device
To identify which endpoints are using the Polycom VBP firewall
1 Go to Endpoint > Monitor View.
2 Click Select Filter and select IP Address.
3 Enter the provider-side IP address of the Polycom VBP device and press
Enter.
The Endpoint list displays the dynamically-managed endpoints that are
registered to the RealPresence Resource Manager system and using the
Polycom VBP firewall. All of the endpoints display the same IP address,
which is the Provider-side IP address of the Polycom VBP device.
However, the endpoints will have different aliases and owners.
This procedure identifies only Polycom HDX, Polycom Group, CMA Desktop,
RealPresence Mobile, RealPresence Desktop and Polycom VVX systems that
are:
• Registered to the RealPresence Resource Manager system
• Using the Polycom VBP firewall
• Use the RealPresence Resource Manager system as their provisioning
server.
One Polycom HDX or legacy endpoint system operating in scheduled
management mode, registered to the RealPresence Resource Manager system,
and using the Polycom VBP firewall may also be displayed in the Endpoint list.
This entry may represent multiple endpoints, since all Polycom HDX or legacy
endpoint system operating in scheduled management mode register with the
same information.
