Polycom RealPresence Resource Manager System Operations Guide Available Settings for a Site Provisioning Profile
234 Polycom, Inc.
Enable Telnet Access Specify whether to allow remote access to the system by Telnet.
Note
The endpoint systems will restart if the remote access settings are changed. This
setting does not deactivate the associated port, only the application. Use the Web
Access Port setting to disable the port.
Enable SNMP Access Specify whether to allow remote access to the system by SNMP.
Note
The endpoint systems will restart if the remote access settings are changed. This
setting does not deactivate the associated port, only the application. Use the Web
Access Port setting to disable the port.
Web Access Port Specify the port to use when accessing the endpoint system’s web interface.
If you change this from the default (port 80), specify a port number of 1025 or higher,
and make sure the port is not already in use. You will need to include the port number
with the IP address when you use the Polycom HDX web interface to access the
system. This makes unauthorized access more difficult.
Note
The system restarts if you change the web access port.
Allow Video Display
On Web
Specify whether to allow viewing of the room where the endpoint system is located,
or video of calls in which the endpoint system participates, using the endpoint
system’s web interface.
Note
This feature activates both near site and far site video displays in Web Director.
NTLM Version Specify the NTLM version the endpoint system should use to authenticate.
Security Settings 2
Idle Session Timeout
in Minutes
When sessions are enabled, Specify the number of minutes your system can be idle
before the session times out.
Lock Port after Failed
Logins
Specify the number of failed login attempts allowed before the system locks the
account. If set to Off, the system will not lock the user account due to failed login
attempts.
This selection controls local and web interface login attempts. For example, if you
select 3 here, a user who fails to log in properly twice on the web interface and twice
on the local interface is locked out on the fourth attempt.
Failed Login Window
in Hours
Specify the amount of time that the account remains locked due to failed login
attempts.
Port Lock Duration in
Minutes
Specify the amount of time that the port remains locked due to failed login attempts.
Table 16-1 Available Settings for a Site Provisioning Profile
Field For the endpoint systems at the site being provisioned...
