Polycom RealPresence Resource Manager System Operations Guide Direct Conference Templates
430 Polycom, Inc.
Presentation Mode • Select to enable Presentation Mode. In this mode, the
system uses the selected layout to display all
participants. When a participant’s speech exceeds a
predefined time (30 seconds), the system identifies
the participant as the lecturer and changes to Lecture
Mode. The video mode for the other participant’s
automatically changes to full screen, displaying the
lecturer, while the lecturer’s endpoint displays
participants in the video mode defined previously.
When another participant starts talking, the system
changes back to Presentation Mode and the
conference returns to its predefined video layout.
• Clear this option do disable Presentation Mode. All
participants see the conference in the video mode
defined elsewhere.
This option is not available if you select any of the
following:
• Video switching option (RMX General Settings)
• Same layout option (RMX Video Settings)
• Telepresence mode is On (RMX Video Settings)
Note
• RMX 1000 systems do not support Lecture Mode,
Presentation Mode, or Lecture View Switching.
Speed (Kbps) Sets the speed for the conference, which applies to both
point-to-point and multipoint calls.
Note
If you use an RMX system profile for conferences that
land on an RMX system, the speed designated here is
used to reserve bandwidth and must match the line rate
defined in the RMX system profile that is identified in the
Profile Name field.
Field Description
