Direct Conference Templates Understanding Conference Templates and Settings
Polycom, Inc. 433
RMX General Settings > Advanced Settings
Auto redialing Instructs the RMX system to automatically redial IP and
SIP participants that have been abnormally disconnected
from the conference.
• The RMX system will not redial an endpoint that has
been disconnected from the conference by the
participant.
• The RMX system will not redial an endpoint that has
been disconnected or deleted from the conference by
an operator or administrator.
Encryption Activate encryption for the conference
LPR Activate lost packet recovery (LPR) for the conference.
Note
LPR can be enabled for VSW conferences, but H.320 and
SIP participants will not be able to connect.
Auto terminate When selected (default), the conference automatically
ends when the termination conditions are met:
• Before first joins — No participant has connected to a
conference during the n minutes after it started.
Default idle time is 10 minutes.
• At the end - After last participant quits — All the
participants have disconnected from the conference
and the conference is idle (empty) for the predefined
time period. Default idle time is 1 minute.
• At the end - When last participant remains — Only
one participant is still connected to the conference for
the predefined time period (excluding the recording
link which is not considered a participant when this
option is selected). This option should be selected
when defining a profile that will be used for Gateway
Calls and you want to ensure that the call is
automatically terminated when only one participant is
connected. Default idle time is 1 minute.
RMX Video Quality > People Video Definition
Video quality Optimizes the video quality based on the amount of
movement contained in the conference video. Possible
values include:
•Motion—Provides a higher frame rate without
increased resolution.
•Sharpness—Provides a higher video resolution and
requires more system resources.
Field Description
