Edit the System Time Settings Setting Up the RealPresence Resource Manager Server
Polycom, Inc. 375
DRAFT
Edit the System Time Settings
Edit the System Time server settings to change the RealPresence Resource
Manager system server time or to synchronize the server with an external NTP
server.
To edit the RealPresence Resource Manager system time settings
1 Go to Admin > Server Settings > System Time.
2 Configure these settings on the System Time page, as necessary.
3 Click Update.
Integrate with Microsoft Exchange Server for Calendaring
Management
The RealPresence Resource Manager system can be used to provision Polycom
Conferencing for Microsoft Outlook, which is reservationless conferencing.
When you use Polycom Conferencing for Microsoft Outlook:
• Video bridge, network resources, and video endpoints are not reserved at
the scheduled time.
Field Description
System Time Zone The time zone in which the Resource Manager
system server resides.
Use Current Time Select this option to input the current date and
time.
Use External NTP
Server Time
Synchronization
Select this option to synchronize the Resource
Manager system date and time with an external
NTP server.
IP address or DNS
resolved name
The IP address or fully qualified domain name
(ASCII only) of the NTP server. If needed, enter
multiple servers separated by a space.
Note
Make sure the current system time is correct before synchronizing with an NTP
server. If you set the system to use an external NTP server when the current
date and time are incorrect, the system time may be wrong for the amount of
time specified in the Minutes between synchronization attempts.
