Filter
Top Products
107
C
Specifications
10/100/1000 BASE-T Cable Specifications
Performance Specifications
Physical Characteristics
Power Requirements
Port Type Connector Media Maximum Distance
10BASE-T RJ-45 Cat. 3, 4, or 5 UTP 100 meters (325 ft)
100/1000BASE-T RJ-45 Cat. 5 UTP 100 meters (325 ft)
NOTE:
1000BASE-T signaling requires four twisted pairs of Category 5 balanced
cabling, as specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-568-A (1995) and
tested for additional performance using testing procedures defined in TIA/EIA
TSB95.
Feature Specification
PC-X clock 133 MHz max
PCI clock 66 MHz max
PCI Data/Address 32 bit and 64 bit
PCI data burst transfer rate 132 Mbps (32-bit bus)
264 Mbps (64-bit bus)
528 Mbps (64-bit bus at 66 MHz)
PCI modes Master/slave
10/100/1000BASE-T 10/100/1000 Mbps (full duplex)
Dimension Measurement
Length 17.3 cm (6.8 in.)
Width 6.4 cm (2.5 in.)
Specification Measurement
Operating voltage +5 V ± 5%
Power consumption 10 Watts
2 A @ +5 VDC