Filter
Top Products
4 Windows 2000 Driver Setup
32
3
Add a NIC to the team.
■
In the Unassigned NICs list, select the NIC(s) that you want to add to the team
created in the previous step. Move the selected NICs to the Team Members list box
using the double arrows.
■
When you have finished configuring failover teams, click
OK
to accept the changes.
4
If a team has no NICs assigned, you will be prompted to add a NIC or delete the team.
Click
OK
. When team has been correctly configured, one Virtual Team NIC driver will
be created for each configured team and will appear along with the other NICs in the
Local Area Connection Properties window. Click
OK
.
5
Configure the team IP address if necessary. Configure the IP address and any other
necessary TCP/IP configuration for the team. Click
OK
when finished. If you are
unsure as to how to configure the TCP/IP properties, consult your Microsoft
documentation.
Removing a NIC from a Team
1
To remove an NIC from its assigned team, select the NIC in the Team Members list and
then click the double left arrow. Click
OK
.
2
In the Local Area Connection Properties window, click
OK
.
The NIC will be removed from the team list and will reappear in the Unassigned
NICs list.
Deleting a Team
1
To delete a configured failover team and release its assigned NICs, select any NIC in
the team list, and then click
Delete Team
. Click
OK
.
2
In the Local Area Connection Properties window click
OK
.
The team and all its assigned NICs will be removed from the team list. The released
NICs will reappear in the Unassigned NICs list.
Configuring VLANs
VLAN Configuration is optional. Before configuring VLANs, see “VLANs Overview” on
page 102.
NOTE:
All other NICs added to the team are reconfigured automatically to match
the team configuration. When the basic configuration properties of a team are
changed, this changes the configuration of all NICs in the team. However, when
a NIC is removed from any failover teams, it will operate according to the
parameters set for it before becoming a member of a failover team.
NOTE:
At least one NIC must be displayed in the Team Members list box.
NOTE:
NICs that are part of a team inherit all the basic configuration properties of
the team, including VLANs associated with the team. If you delete a team, any
VLANs configured for that team will also be deleted.