Filter
Top Products
Uninstalling Advanced Server Features
43
3
Add a NIC to the team.
■
In the Unassigned NICs list, select the NIC(s) that you want to add to the team
(created in the previous step). Move the selected NIC(s) to the Team members list
box using the double arrows.
■
When you have finished configuring failover teams, click
OK
to accept the changes.
■
In the Network window, click
Close
.
4
The TCP/IP Properties window appears. Configure the Team IP address. Configure the
IP address and any other necessary TCP/IP configuration for the team and click
OK
when finished. If you are unsure as to how to configure the TCP/IP properties, consult
your Microsoft documentation.
5
When prompted to restart the system, click
Yes
. The system restarts, making
the changes.
Removing NICs from a Team
1
To remove a NIC from its assigned team, select the NIC in the Team Members list and
click the double left arrow. Click
OK
.
2
In the Network window, click
Close
.
3
When prompted to restart the system, click
Yes
.
The NIC will be removed from the team list and will reappear in the Unassigned
NICs list.
Deleting a Team
1
To delete a configured failover team and release its assigned NICs, select the NIC in
the team list, and then click
Delete Team
. Click
OK
.
2
In the Network window, click
Close
.
3
When prompted to restart the system, click
Yes
.
The team and all its assigned NICs will be removed from the team list. The released
NICs will reappear in the Unassigned NICs list.
NOTE:
All other NICs added to the team are reconfigured automatically to match
the team configuration. When a basic team configuration properties are changed,
this changes the configuration of all NICs in the team. However, after an NIC has
been removed from any team, it will operate according to the parameters set for it
before becoming a member of a team.
NOTE:
At least one NIC must be displayed in the Team Members list box. If a team
has no NICs assigned, you will be prompted to add another NIC or delete
the team.
NOTE:
NICs that are part of a team inherit all the basic configuration properties of
the team, including VLANs associated with the team. If you delete a team, any
VLANs configured for that team will also be deleted.