Filter
Top Products
2 Installing and Connecting the NIC
10
Installing and Connecting the NIC
This manual covers two types of Gigabit Server NICs: server Ethernet NIC (3C996B-T):
and server fiber NIC (3C996-SX):
The procedure for installing a NIC in a system is identical for both NICs. Connecting the
network cables is different for Ethernet and fiber NICs (see “Connecting the Network
Cables” on page 12”).
Installing the NIC
1
Review the precautions and pre-installation instructions. Before installing the NIC,
ensure the system power is off, the system is unplugged from the power outlet, and
that proper electrical grounding procedures have been followed. Refer to the
following figure to complete the remaining steps.
2
Remove the system cover, and select any empty PCI slot. If you do not know how to
identify a PCI slot, refer to your system documentation.