Filter
Top Products
Safety Precautions
9
Safety Precautions
Observe the following safety precautions.
Pre-Installation Checklist
1
Check that your server meets the hardware and software requirements listed under
“System Requirements” on page 7.
2
Verify that your system is using the latest BIOS.
3
Review the information in the release.txt file on the
3Com Installation CD
for
important information not available at the time this manual was created.
4
If your system is active, shut it down.
■
Under Windows 2000
If Windows 2000 is currently running, close all applications and select
Start/Shut
Down
. When the window appears, select
Shut Down
from the pull-down options,
and click
OK
.
■
Under Windows NT
If Windows NT is currently running, close all applications and select
Start/Shut
Down
. Shut down the computer.
■
Under NetWare
If Novell NetWare is currently running, use the
down
command (NetWare 5) or the
down
and
exit
commands (NetWare 4) at the server_name prompt to gracefully
shut down the server functions and reach the DOS prompt:
server_name: down
server_name: exit
■
Under Linux
If Redhat Linux is currently running, close all applications and at the command
prompt type
init 0
to halt the machine. Once the machine is halted, you may
have to turn off the power switch manually.
5
When system shut down is complete, turn the power off and unplug your system.
6
Holding the NIC card by the edges, remove it from its shipping package and place it
on an anti-static surface.
7
Check the NIC for visible signs of damage, particularly on the edge connector. Never
attempt to install any damaged NIC. If the NIC is damaged, report it to your supplier.
WARNING:
The NIC is being installed in a system that operates with voltages that
can be lethal. Before you remove the cover of your system, you must observe the
following precautions to protect yourself and to prevent damage to the system
components.
■
Remove any metallic objects or jewelry from your hands and wrists.
■
Use only insulated or nonconducting tools.
■
Verify that the system is powered OFF and unplugged before removing
the cover.
■
Install or remove NICs only in a static-free environment. The use of a properly
grounded wrist strap (or other personal anti-static device) and an anti-static
mat are strongly recommended.
NOTE:
If you acquired the adapter software on a floppy disk or from a third-party
support Web site, please check the appropriate source for the most recent
information.