Filter
Top Products
136
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
FTP Configuration
PC side:
Start the FTP server software on the PC and set the username as “Switch”, and the password as
“edgecore”.
ES4710BD：
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#dir ftp://Switch:edgecore@10.1.1.1
220 Serv-U FTP-Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.
200 PORT Command successful.
150 Opening ASCII mode data connection for /bin/ls.
recv total = 480
nos.img
nos.rom
parsecommandline.cpp
position.doc
qmdict.zip
shell maintenance statistics.xls
… (some display omitted here)
show.txt
snmp.TXT
226 Transfer complete.
Switch (Config)#
5.5.2.4 FTP/TFTP Troubleshooting Help
5.5.2.4.1 Monitor and Debug Commands
5.5.2.4.2 show ftp
Command: show ftp
Function: display the parameter settings for the FTP server
Command mode: Admin Mode
Default: No display by default.