Filter
Top Products
322
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
14.6.2.7 Manual address pool configuration
Click “DHCP configuration”, “DHCP server configuration”, “Manual address pool configuration”
to configure DHCP to manually allocate address:
z DHCP pool name – Choose one DHCP address pool
z Hardware address – assigns user hardware address. Same as CLI command 14.2.2.7
z Client IP – allocated IP address for a specific client
z Client network mask – allocated IP address mask for a specific client. Same as CLI command
14.2.2.8
z User name (1-255 characters) – assigns user exclusive name. Same as CLI command 14.2.2.2
Example: Choose DHCP pool name as 1, configure Hardware address as 00-00-e2-3a-26-04,
configure Client IP as 10.1.128.160, configure Client network mask as 255.255.255.0, configure
User name as 00-00-e2-3a-26-04, and then click Add to apply the configuration to switch.
14.6.2.8 Excluded address configuration
Click “DHCP configuration”, “DHCP server configuration”, “Excluded address configuration” to
exclude an address from dynamic allocation in the address pool. Same as CLI command 14.2.2.10:
z Starting address – is starting IP address
z Ending address – is ending IP address
z Operation type – configures or removes the address which will not be dynamic allocated in the
address pool.
Example: Configure the Starting address as 10.1.128.1, configure Ending address as 10.1.128.10,
and choose Operation type as Add address not for allocating dynamically. Click Apply button to
apply this configuration to switch.