Filter
Top Products
86
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
4.2.1 CLI Interface
CLI interface is familiar to most users. As aforementioned, out-of-band management and Telnet
login are all performed through CLI interface to manage the switch.
CLI Interface is supported by Shell program, which consists of a set of configuration
commands. Those commands are categorized according to their functions in switch configuration
and management. Each category represents a different configuration mode. The Shell for the switch
is described below in Fig 4-10:\
z Configuration Modes
z Configuration Syntax
z Shortcut keys
z Help function
z Input verification
z Fuzzy match support
4.2.1.1 Configuration Modes
Fig 4-10 Shell Configuration Modes for ES4710BD
4.2.1.1.1 User Mode
On entering the CLI interface, the default is User Mode. The prompt shown is “Switch>”, the
symbol “>” is the prompt for User Mode. When the exit command is run under Admin Mode, it will
return to the User Mode.
Under User Mode, no configuration to the switch is allowed, only clock time and version
information of the switch can be queried.
User Mode
Admin Mode
Global Mode
Interface Mode
Vlan Mode
DHCP address pool
configuration mode
Route configuration
mode
ACL configuration
mode