Filter
Top Products
58 Chapter 2
Installing the E5810
Installing the E5810 on an Enterprise Network
2 Display the Current Configuration Page. from the Welcome page, click
the
View & Modify Configuration icon to display the Current
Configuration of E5810 LAN/GPIB Gateway
page
3
Display the Modify Configuration Page. From the Current Configuration
of E5810 LAN/GPIB Gateway
page, click the Modify Configuration button
to display the
Password dialog box.
If the default password (E5810) is being used, the password is
displayed as asterisks (*****). If not, type in the current password. Then,
click the
Submit button to display the Configuring Your E5810 LAN/GPIB
Gateway
page.
Click this icon