Filter
Top Products
64 Chapter 2
Installing the E5810
Installing and Configuring the Agilent IO Libraries Suite
Installing and Configuring the Agilent
IO Libraries Suite
The following steps describe installing the Agilent IO Libraries Suite,
using default settings, including:
Checking for Installed Agilent IO Libraries or Agilent IO Libraries
Suite
Installing Agilent IO Libraries Suite
Check for Installed
Agilent IO Libraries
Before you begin installation, check for previously installed Agilent IO
Libraries software. If a version of the Agilent IO Libraries Suite is installed on
your PC, an IO icon may be displayed on the Windows taskbar (on the lower
right-hand side of the screen as shown below)
.
NOTE
See the Agilent IO Libraries Connectivity Guide on your Automation-
Ready CD for a full description of installation options and installation
troubleshooting information.
NOTE
You must have Administrator privileges to install the IO Libraries Suite
and to run the Connection Expert utility.
IO Libraries Suite 15 icon
(previous versions used a
different icon)