Agilent Technologies E5810A Network Card User Manual


 
Chapter 3 79
Using E5810 Web Access
Opening Your Web Browser for E5810 Web Access
Opening Your Web Browser for E5810 Web
Access
Since the E5810 is Web-enabled, you can access and communicate with the
E5810 using your Web browser (Internet Explorer 4.0 or higher or Netscape
4.7 or higher).
To display the E5810
Welcome page, open your Web browser and type
http://<E5810 IP Address> or http://<E5810 Hostname>
on the address line, where <E5810 IP Address> is the IP address of the
E5810 and <E5810 hostname> is the Hostname of the E5810 (if known).
Then, press the
Enter key.
For example, assume the E5810 IP Address is 169.254.58.10 (the default
static IP address). Typing http://169.254.58.10 and pressing
Enter
displays the E5810
Welcome page. A typical Welcome page display (with a
non-default IP address shown) follows. The
Welcome page is the home
page. The banner and the Navigation Bar (Welcome Page, etc.) are a fixed
frame for each page. The text within each page scrolls (as necessary) to
display desired information.