Filter
Top Products
LAN Interface Supplement 6-31
Controlling the Analyzer via the LAN
Controlling the Analyzer using HP VEE
Controlling the Analyzer using HP VEE
To control your analyzer via LAN using HP VEE, click on the VEE menu
titled "I/O." Then select "To/From Socket" and position the I/O object box
on the screen. Fill in the following fields:
Connect Port: 5025
Host Name: <hostname>
Timeout: 15
For faster troubleshooting, you may want to set the timeout to a smaller
number. If the hostname you enter doesn't work, try using the IP address
of your analyzer (example: 15.4.43.5). Using the IP address rather
than the hostname may also be faster. See Figure 6-1 for an example of
an HP VEE screen.
NOTE If you need to control the GPIB using “device clear” or SRQs, you can use
SICL LAN. SICL LAN provides control of your analyzer via GPIB. See
“Controlling the Analyzer using SICL LAN” on page 6-42.