Filter
Top Products
1-18 LAN Interface Supplement
Connecting and Configuring the Analyzer
Using BOOTP
Normally, your analyzer will obtain this file name from the BOOTP
server, but you can override this using . If you
do not want to use , make sure that it contains
a null string. To do that, press
NOTE You can set up your BOOTP server to select the file to download when the
analyzer boots. Consult your BOOTP server documentation or your
system administrator about setting up a BOOTPTAB file on the BOOTP
server.
Testing BOOTP
After your analyzer has been set up correctly as a BOOTP client, make
sure that the BOOTP server is also set up correctly and is running.
Consult your network administrator if you need help doing this.
Perform the steps below to verify that BOOTP works correctly:
1. Press
.
The following dialog box will appear:
Optional File Name
Optional File Name
Optional File Name
Clear Entry
Etry
Enter
SYSTEM OPTIONS
LAN
BOOTP Setup
Parameters Received