Agilent Technologies ES Switch User Manual


 
LAN Interface Supplement 7-9
Using the Network File System (NFS)
Setting Up NFS
Confirming Remote File System Mounting
To find out if a remote file system has been successfully mounted, press
The analyzer will display an NFS device table containing three columns
(left to right):
1. Device number, in the order mounted
2. Name of the local file system
3. Remote file system name and IP address
Press to view an expanded version of your local file
system.
Press to view an expanded version of your remote file
system.
Setting up NFS Client Authentication IDs
Perform the following steps to set up authentication IDs for your NFS
client:
1. Press
.
2. Press and type in the user ID for your remote file system.
3. Press and type in the group ID for your remote file
system.
NOTE Some systems use only the user ID. If your remote file system does not
use a group ID, use the default Group ID value.
SYSTEM OPTIONS
LAN
NFS Device Setup
Dvice Setup
NFS Device Table
Dvice Setup
Local Path
Remote Path
SYSTEM OPTIONS
LAN
NFS Device Setup
Dvice Setup
Authentication
Dvice Setup
User ID
Group ID