Agilent Technologies ES Switch User Manual


 
7-6 LAN Interface Supplement
Using the Network File System (NFS)
Setting Up NFS
Preliminary Requirements
Before setting up the NFS client on your analyzer, do the following:
Set up an NFS server on the remote system. Consult your system
administrator if you are unsure how to do this.
Collect the following information required to configure your analyzer
as the NFS client:
The host name and IP address for the remote system (the server).
For example: host1 and 123.046.025.221
The name of your remote file system or subdirectory.
For example: /users/yourname/na_setups
The user ID and the group ID to allow access to the remote host
file system.
For example: user ID = 2001, group ID = 100
A local name to assign to the remote file system. Choose a local
name which is short and easy to remember. Append a colon (:) or
some other special character if you need to distinguish a device
name from a subdirectory name on your menu.
For example: c:\nfs\setups
NOTE You may find it convenient to use an external keyboard when performing
the following procedure.
Save/Recall