Filter
Top Products
6-8 LAN Interface Supplement
Controlling the Analyzer via the LAN
Entering Commands Directly with Telnet
The telnet connection closes and you see your regular prompt.
Connection closed.
$
NOTE You can also control your analyzer from your web browser. See
“Accessing the Analyzer with Your Web Browser” on page 2-4.
NOTE If your telnet connection is in a mode called "line-by-line," there is no
local echo. This means you will not be able to see the characters you are
typing on your computer's display until after you press the Enter key.
To remedy this, you need to change your telnet connection to
"character-by-character" mode. This can be accomplished in most
systems by escaping out of telnet to the telnet> prompt and then
typing mode char. If this does not work, consult your telnet program's
documentation for how to change to "character-by-character" mode.