Filter
Top Products
Configuring BGP Setting Global BGP Parameters
OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide December 2007 page 4-25
Displaying Global BGP Parameters
The following list shows the commands for viewing the various aspects of BGP set with the global BGP
commands:
For more information about the output from these show commands, see the OmniSwitch CLI Reference
Guide.
show ip bgp Displays the current global settings for the local BGP speaker.
show ip bgp statistics Displays BGP global statistics, such as the route paths.
show ip bgp aggregate-address Displays aggregate configuration information.
show ip bgp dampening Displays the current route dampening configuration settings.
show ip bgp dampening-stats Displays route flapping statistics.
show ip bgp network Displays information on the currently defined BGP networks.
show ip bgp path Displays information, such as Next Hop and other BGP attributes, for
every path in the BGP routing table.
show ip bgp routes Displays information on BGP routes known to the router. This informa-
tion includes whether changes to the route are in progress, whether it is
part of an aggregate route, and whether it is dampened.