Filter
Top Products
Quick Steps for Configuring DVMRP Configuring DVMRP
page 6-4 OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide December 2007
Note. Optional. To verify DVMRP interface status, enter the show ip dvmrp interface command. The
display is similar to the one shown here:
Address Vlan Metric Admin-Status Oper-Status
-----------------+------+--------+-------------+-------------
178.14.1.43 44 1 Enabled Enabled
To verify the global DVMRP status, enter the show ip dvmrp command:
DVMRP Admin Status = enabled,
Flash Interval = 5,
Graft Timeout = 5,
Neighbor Interval = 10,
Neighbor Timeout = 35,
Prune Lifetime = 7200,
Prune Timeout = 30,
Report Interval = 60,
Route Holddown = 120,
Route Timeout = 140,
Subord Default = true,
Number of Routes = 20,
Number of Reachable Routes = 18
For more information about these displays, see the “DVMRP Commands” chapter in the OmniSwitch CLI
Reference Guide.