Filter
Top Products
Configuring BGP for IPv6 Configuring BGP
page 4-72 OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide December 2007
Optional IPv6 BGP Peer Parameters
Peer Parameter Command
Default Value/
Comments
The interval, in seconds, between BGP retries
to set up a connection via the transport protocol
with another peer.
ipv6 bgp neighbor conn-retry-
interval
120 seconds
Enables or disables a BGP speaker to send a
default route to its peer.
ipv6 bgp neighbor default-origi-
nate
Disabled
Configures the KEEPALIVE message interval
and hold time interval (in seconds) with regards
to the specified BGP peer.
ipv6 bgp neighbor timers 30 seconds
(keepalive)
90 seconds
(holdtime)
Configures the maximum number of prefixes
or paths the local router can receive from a
BGP peer in UPDATE messages.
ipv6 bgp neighbor maximum-
prefix
5000
Configures the local IPv6 interface from which
a BGP peer will be connected.
ipv6 bgp neighbor update-
source
Not set until con-
figured
Configures router to advertise its peering
address as the next hop address for the speci-
fied neighbor.
ipv6 bgp neighbor next-hop-self Disabled