Filter
Top Products
Additional information about diskutil and other uses can be found in Introduction to
Command-Line Administration. For complete command syntax for diskutil, consult
the tool’s man page.
The specic command issued depends on your disk format needs and the hardware in
use. Take care to use command-line arguments that apply to your specic needs.
The following command is a sample, which partitions a computer’s only 120 GB hard
disk into two equal 60 GB journaled HFS+ volumes (“BootDisk” and “DataStore”), which
can start up an Intel-based Mac computer.
The basic syntax is:
diskutil partitionDisk device numberOfPartitions GPTFormat <part1Format
part1Name part1Size> <part2Format part2Name part2Size>
So the command is:
diskutil partitionDisk disk0 2 GPTFormat JournaledHFS+ BootDisk 50%
JournaledHFS+ DataStore 50%
About Creating a RAID Set
If you’re installing Mac OS X Server on a computer with multiple internal hard disks,
you can create a RAID set to optimize storage capacity, improve performance, and
increase reliability in case of a disk failure.
For example, a mirrored RAID set increases reliability by writing your data to two or
more disks at once. If one disk fails, your server uses another disk in the RAID set.
You can use Disk Utility to set up a RAID set. There are two types of RAID sets and one
additional disk option available in Disk Utility:
 A striped RAID set (RAID 0) splits les across the disks in the set. A striped RAID
set improves the performance of your software because it can read and write on
all disks in the set at the same time. You might use a striped RAID set if you are
working with large les, such as digital video.
 A mirrored RAID set (RAID 1) duplicates les across the disks in the set. Because
this scheme maintains copies of the les, it provides a continuous backup of them.
In addition, it can help keep data available if a disk in the set fails. Mirroring is
recommended if shared les or applications must be accessed frequently.
You can set up RAID mirroring after installing Mac OS X Server if you install on a disk
that isn’t partitioned. To prevent data loss, set up RAID mirroring as soon as possible.
 A concatenated disk set lets you use several disks as a single volume. This is not a
true RAID set and oers no redundancy or performance increase.
96 Chapter 5 Installation and Deployment