Filter
Top Products
2 Locate the ID number indicator and switch (usually on the back panel of the SCSI
device).
3Check the ID numbers of all the devices you want to connect.
If all the devices have unique ID numbers, you can continue with the next
section, “Checking That the SCSI Chain Is Properly Terminated.”
4If you need to change a device’s ID number, choose an available number between 1
and 6.
IMPORTANT
Hard drives installed in the Duo Dock or Duo Dock II are preset
to have a SCSI ID number of 1. SCSI devices connected to a Duo Dock or
Duo Dock II should use SCSI ID numbers 2 through 6.
5Press the appropriate button to increase or decrease the SCSI ID number.
If your SCSI device does not have an ID number switch like the one pictured
above, consult the manual that came with your SCSI device for details.
ID number switch
ID number indicator
101
Using SCSI Devices