Filter
Top Products
Connecting your PowerBook as a SCSI disk
Before making any connections, you need to assign a SCSI ID number to the
PowerBook.
1Choose Control Panels from the Apple (
K
) menu of your PowerBook computer.
2 Open the PowerBook Setup control panel.
3 In the SCSI Disk Mode section of the control panel, click the ID number you want to
assign.
If you are connecting the PowerBook to an existing SCSI chain, make sure to
give it an ID number different from those of the other devices.
4Close the PowerBook Setup control panel.
5 Turn off the PowerBook by choosing Shut Down from the Special menu.
6Shut down the computer you want to connect your PowerBook to, and turn off other
devices in the SCSI chain.
7Connect the PowerBook to the other computer or to the end of the SCSI chain.
WARNING
Always shut down the PowerBook before connecting or
disconnecting the SCSI disk adapter cable. Connecting the adapter cable
while the computer is turned on can damage the computer.
105
Using SCSI Devices