Filter
Top Products
Quitting SCSI disk mode
1Shut down the computer your PowerBook is connected to.
2 Turn the PowerBook off by holding down the
x
(Command) key and power button on the
back of your PowerBook (marked with the icon
I
) at the same time.
3 Turn off any other SCSI devices in the chain.
4Disconnect the PowerBook from the adapter cable.
If you plan to connect your PowerBook regularly to the same computer, you
can leave the adapter cable attached to the SCSI chain or the other computer.
See “Simplifying the SCSI Disk Connection Process,” earlier in this chapter.
IMPORTANT
Do not leave the adapter cable attached to the PowerBook. If you
do, the computer will behave as though it is still in SCSI disk mode when you
try to restart.
5If necessary, disconnect the adapter cable from the other computer or its SCSI chain.
Your equipment is now ready for normal use.
108
Chapter 9