Filter
Top Products
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 87
VLAN Commands
Show trunk Command
Use the show trunk command to display VLAN tagging information of the ports.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Example:
P130-N> show trunk 1/22
show trunk 1/22
Port Mode Binding mode Native vlan Vlans allowed on trunk
------ ----- -------------------- ----------- ----------------------
1/22 off statically bound 1 1
Following are the show trunk command output fields:
<mod_num> Module number
<port_num> Number of the port on the module
Field Description
Port Module and port number(s)
Mode Tag status of the port (ON - dot1Q tagging mode,
OFF - clear mode).
Native VLAN Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned). If the Port is in “clear
mode” only frames of this VLAN will be transmitted.
VLANs allowed
on trunk
Range of values allowed on the Trunk