Filter
Top Products
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 105
Radius Commands
Show radius authentication Command
Use the show radius authentication command to display all RADIUS
authentication configurations. The shared secrets will not be displayed.
The syntax for this command is:
show radius authentication
Example:
P130-N(super)# show radius authentication
RADIUS Authentication Parameters:
-------------------------------------------------
Mode: Enabled
Primary-server: 149.49.42.252
Secondary-server: 149.49.48.134
Retry-number: 4
Retry-time: 5
UDP-port: 1645
shared-secret: sodot
Set radius authentication Command
Use the set radius authentication command to enable or disable
authentication for the P130 unit. RADIUS authentication is disabled by default.
The syntax for this command is:
set radius authentication {enable | disable}
Set radius authentication secret Command
Use the set radius authentication command to enable secret authentication
for the P130 unit.
The syntax for this command is:
set radius authentication secret <string>
Example:
P130-N(super)# set radius authentication secret sodot
<string> Text password