Filter
Top Products
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 59
Copy module-config tftp Command
Use the copy module-config tftp command to upload the module-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
Example:
P130-1# copy module-config tftp c:\p130\switch1.cfg
192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
Copy tftp stack-config Command
Use the copy tftp stack-config command to download the stack-level
configuration from a saved file into the current NVRAM running configuration, via
TFTP.
The syntax for this command is:
copy tftp stack-config <filename> <ip>
Example:
P130-1# copy tftp stack-config c:\p130\switch1.cfg
192.168.49.10
<filename> File name (full path)
<ip> The IP address of the host
<mod_num> Module number
<filename> File name (full path)
<ip> The IP address of the host