Filter
Top Products
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 67
Show port flowcontrol Command
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [mod_num/port_num]
Example:
To display the flow-control port status and statistics:
Console> show port flowcontrol
Port Send-Flowcontrol Receive-Flowcntl
Admin Oper Admin Oper
----- ------- ------ ------- -----
1/2 off off off off
1/3 on on off off
etc.
Output Fields:
mod_num Module number (optional).
port_num Number of the port on the module (optional). If you
do not specify a number, filters configured on all the
ports on the module are shown.
Field Description
Port Module and port number
Send- Flowcontrol-Admin Send flow-control administration. Possible
settings:
- on indicates the local port is capable of sending a
flow control advertisement to the far end;
- off indicates the local port is not capable of
sending a flow control advertisement to the far end
Send- Flowcontrol-Oper Send flow-control operation mode
Receive- Flowcontrol-Admin Receive flow-control administration. Possible
settings:
- on indicates the local port can request the far end
to send flow control advertisement;
- off indicates the local port cannot request the far
end to send flow control advertisement
Receive- Flowcontrol-Oper Receive flow-control operation mode