Filter
Top Products
128 Avaya P130 User’s Guide
Running the Embedded Manager
Note: You should assign an IP address to the switch before beginning this procedure.
1Open your browser.
2 Enter the url of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd is the IP address of the switch.
Note: The user name is “root”
The default password for read-write access is “root”.
Note: The Web management passwords are the same as those of the CLI. If you
have created additional CLI user names or changed the default passwords then you
can use those passwords for Web management as well.
The welcome page is displayed:
Figure A.1 The Welcome Page