Filter
Top Products
Chapter 6 Avaya P130 CLI
58 Avaya P130 User’s Guide
Show tftp download software status Command
Use the show tftp download software status commands to display the
status of the current TFTP Device Manager S/W (Embedded Web) download
process into the device.
The syntax for this command is:
show tftp download software status [<mod_num>]
Example:
P130-N> show tftp download software status
Module : 1
Source file : /home2/users/vkopilev/work/P130/brs_integr/
bsp_64115/vxWorks.
st_appl.bout.burn
Destination file : p130
Host : 149.49.39.76
Running state : Idle
Failure display : (null)
Last warning : No-warning
Copy stack-config tftp Command
Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy stack-config tftp <filename> <ip>
Example:
P130-1# copy stack-config tftp c:\conf.cfg 149.49.36.200
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
<mod_num> Module number
<filename> File name (full path)
<ip> The IP address of the host