Filter
Top Products
Chapter 6 Avaya P130 CLI
114 Avaya P130 User’s Guide
Show snmp timeout Command
Use the show snmp timeout command to display the default SNMP timeout in
seconds. This command is useful for access using the Device Manager.
The syntax for this command is:
show snmp timeout
Example:
P130-N> show snmp timeout
the SNMP Timeout is 2000
Set snmp community Command
Use the set snmp community command to set SNMP communities and
associated access types.
There are three configurable SNMP communities, one for each access type. If you do
not specify the community string, the string configured for that access type is
cleared. One community string different from the default (“public”) should be
configured for each access type in order for secure SNMP access.
The syntax for this command is:
set snmp community {read-only|read-write|trap} [community_string]
The default configuration has the following communities and access types defined:
read-only – public
read-write – public
public-trap – public
Example:
To set read-write access to the SNMP community called snow:
P130-1# set snmp community read-write snow
SNMP read-write community string set.
read-only Assign read-only access to the specified SNMP community.
read-write Assign read-write access to the specified SNMP community.
trap Assign SNMP community to trap.
community_string (Optional) Name of the SNMP community. If no name is
specified this command will clear any community for this
access type.