Filter
Top Products
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 125
Set qos dscp-cos-map Command
Use the set qos dscp-cos-map command to configure the DSCP table.
The syntax for this command is:
set qos dscp-cos-map <dscp1>[-<dscp2>] <operation>
Example:
P130-N(super)# set qos dscp-cos-map 9-11 fwd3
Example:
P130-N(super)# set qos dscp-cos-map 8 fwd7
Set qos dscp-name Command
Use the set qos dscp-name command to configure the DSCP entry name.
The syntax for this command is:
set qos dscp-name <dscp> <name>
Example:
P130-N(super)# set qos dscp-name 10 "special"
<dscp1> DSCP range min (0-63)
<dscp2> DSCP range max (0-63)
<operation> fwd0-7|no-change
where fwd0-7 - forward this packet with priority
level from 0 to 7, and
no-change - do not change the priority level
<dscp> DSCP entry (0-63)
<name> Entry name