Filter
Top Products
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 53
Show keep alive Command
Use the show keep alive command to view the keep alive interval.
The time value is in seconds.
The syntax for this command is:
show keep alive
Example:
P130-1# show keep alive
Keep Alive interval is: 5
Show timeout Command
Use the show timeout command to display the amount of time the CLI can
remain idle before timing out in minutes. If the result is 0, there is no timeout limit.
The syntax for this command is:
show timeout
Example:
P130-N> show timeout
CLI timeout is 10 minutes
Set logout Command
Use the set logout command to set the number of minutes until the system
automatically disconnects an idle session.
The syntax for this command is:
set logout <timeout>
Example:
To set the number of minutes until the system disconnects an idle session
automatically:
P130-1# set logout 20
Sessions will be automatically logged out after 20 minutes of
idle time.
<timeout> Number of minutes (0 to 999) until the system automatically
disconnects an idle session. Setting the value to 0 disables the
automatic disconnection of idle sessions (default is 15 minutes).