Filter
Top Products
Chapter 6 Avaya P130 CLI
56 Avaya P130 User’s Guide
Download/Upload Commands
Dir Command
The dir command is used to show the file types that have been downloaded to the
module.
The syntax for this command is:
dir [<mod_num>]
Example:
P130-N> dir
M# file ver num file type file location file description
-- ---- -------- ---------- ------------- ----------------
1 p130 1.1.5 SW RT Image Flash Bank A Software Image
1 W133T 1.0.2 SW Web Image Flash Bank A Web Image
1 module-config N/A Running Conf Nv-Ram module configuration
Output Fields:
<mod_num> Module number
Field Description
M# Module number
file There are several files loaded into modules memory:
• module-config - file which contains the configuration
settings made to the module.
• stack-config - file which contains the configuration settings
made at the stack level (e.g. IP address of the stack).
• startup-config – file which contains the multilayer policy
configuration settings made to this module.
• running-config - file which contains the multilayer policy
configuration currently in use.
• p130 - file which contains the module software.
• W133T – file which contains the Device Manager
(Embedded Web) software.
• policy-startup - For internal use only.
• policy-running - For internal use only.
ver num S/W Version number – relevant only for the Device
Management S/W