Filter
Top Products
12. Display setup
12.8 AutoImage Setup
What can be done ?
Autoimage allows to detect automatically the characteristics of the source (total pixels per line,...) and uses this information to adapt
the image to the LCD panels.
Autoimage can adapt the image based on following data :
• Total pixels per line
• Start pixel
• Phase
• Contrast/brightness levels
Autoimage works only for data signals.
How to set up AutoImage?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select AutoImage setup (image 12-11)
5. Press ENTER
A dialog box is displayed.
(image 12-12)
6. Use the arrow keys to select the desired item and press ENTER to activate or disactivate the item.
Image 12-11
Image 12-12
How to perform AutoImage ?
1. Press AutoImage on the RCU
A textbox showing a progress bar is displayed.
110
R5976491 IQ PRO G500 01/02/2007